Epoxy black paint (IPS – M – TP-190)
The color of Ecolar Black Epoxy Coulter is a two-component color of Epoxy-Poly Omid Coulter and exactly matches IPS-M-TP-190. In this product, Coulter is used, which in addition to the flexibility of the film, completely insulates the surface and prevents the penetration of corrosive agents such as water and chemicals. The hardening mechanism is the result of solvent evaporation and the reaction between the components
[print_button_en]
Description of solvent-free sanitary epoxy primer
Its properties include:
- Very good corrosion resistance
- High chemical resistance
- High abrasion resistance and hardness
- Excellent water and moisture resistance
- Good adhesion to steel surfaces
- Applicable with thicknesses over 200 microns
- Surface impermeability
- Designed for health systems
- Shine and excellent appearance
Uses
This coating is used alone as the final layer of sanitary epoxy systems and drinking water to protect the surfaces against corrosion and microbes. Due to the high solid percentage of paint with a spraying step, thicknesses up to 500 microns can be achieved. Its uses include:
- Drinking water tanks
- Water transfer pipes
- Sanitary equipment
- Industrial Drug Making Machines
- Food Equipment
- Food storage cells
- Sanitary ware containers
- Clean hall and operating room flooring
Technical specifications
| فام | White (other shades suggested subject to conditions) |
| Volume solid percentage | 100 |
| Storage time | one year |
| Recommended thickness | 500 to 200 microns |
| Density | 05, 0 ± 1.53 |
| 50 micron theory cover | 1.5 square meters per kilogram |
| Theoretical coverage of 100 microns per liter | 6 m2 / td> |
Drying and coating conditions
| Drying time | Next layer application time | ||||||
| Temperature | surface | practical | Complete hardening | minimum | Maximum | Notes | |
| 25 ° C | 4 hours | 24 hours | 7 days | 12 to 24 hours | 6 days | Other factors such as the thickness of the color film and temperature changes, etc. affect the drying time. | |
Terms and equipment of application
| Thinner | TEP (Epoxy Thinner) |
| Application temperature | 5 to 50 degrees Celsius |
| Maximum relative humidity | 80% |
| Surface temperature | 3 to 5 degrees above the dew point |
| Application method | Air spray. Airless spray, brush and roll |
| useful life of paint and hardener mixture | 1 hour at 20 ° C |
| Application conditions | Ordinary spray | Airless spray | brush | Roll |
| Percent solvent | 15-10% | 8-5% | 9-6% | 9-6% |
| head pressure | 4-6 times | 120-160 times | ||
| Nozzle head diameter | 1.6 to 1.8 mm | 0.35 to 0.5 mm | ||
| hand distance | 30-50% | 40-60 cm |
Surface preparation
Painted surfaces – These surfaces must be completely clean and free of any grease and other contaminants. Before painting, the surface should be completely dry and if a long time has passed since the application of the undercoat, a suitable roughness should be created by soft sanding on the surface.
Steel surfaces – Wash the steel surface with a suitable solvent to remove grease, salt and any other contaminants.
De-rust and create profiles on surfaces by various methods such as sand blasting up to 2.5 degrees Swedish or by mechanical tools up to ISO-ST3 degree.
In metal structures and welded points and corners should be smooth and polished and free of any appendages and sharpness. After de-rusting and creating a profile, remove the particles from the preparation and other contaminants from the surface with a pressure of air free of moisture and grease and with the method of vacuum and thoroughly clean.
Note that the application of the first layer (primer) should be done no later than two hours after preparation.
Concrete surfaces – If the concrete is fresh, it must be 28 days after the concrete has been applied (the concrete surface is completely dry). If the concrete is old, the surface must be washed with fresh water to remove contaminants such as salts, grease, dust and Dust, loose and unstable particles, etc. from its surface
Description of Coltarapox Black Color (IPS – M – TP-190)
Its properties include:
- High flexibility
- High hardness and impermeability
- Good resistance to chemicals
- Excellent water and moisture resistance
- Excellent adhesion to concrete and metal surfaces
- Ability to run at thicknesses up to 500 microns
Uses
This coating is used alone or in the framework of a coating system to protect metal and concrete surfaces against the penetration of water, moisture and chemicals. Among the materials used for this coating are:
- Water and Wastewater Treatment Stations
- Pipes and tanks buried in the ground
- Ship of equilibrium tank inner liner
- Inner lining of concrete sewer pipes
- Refineries, power plants and chemical plants, industrial structures and structures immersed in water
Technical specifications
| فام | black |
| Volume solid percentage | 80 ± 2 |
| Storage time | one year |
| Recommended thickness | 100 to 400 microns |
| Density | 05, 0 ± 1.25 |
| Theoretical coverage of 70 microns per kilogram | 4 square meters |
| Theoretical coverage of 70 microns per liter | 5.3 square meters |
| percentage by weight | 88 ± 1 |
| Number of components | Two components |
| weight ratio of components | 82% of the first component and 18% of the second component (hardener) |
| Volume mixing ratio of components | 78% of the first component and 22% of the second component (hardener) |
Drying and coating conditions
| Drying time | Next layer application time | ||||||
| Temperature | surface | depth | Complete hardening | minimum | Maximum | Notes | |
| 25 ° C | 8 hours | 24 hours | 7 days | 24 hours | 7 days | Other factors such as the thickness of the color film and temperature changes, etc. affect the drying time. | |
Terms and equipment of application
| Thinner | TED (Epoxy Thinner) |
| Application temperature | 5 to 50 degrees Celsius |
| Maximum relative humidity | 80% |
| mixing ratio | 82 to 18 |
| Surface temperature | 3 to 5 degrees above the dew point |
| Application method | Air spray. Airless spray, brush and roll |
| useful life of paint and hardener mixture | 6 hours at 20 ° C |
| Application conditions | Ordinary spray | Airless spray | brush | Roll |
| Percent solvent | 20-10% | 8-4% | 9-6% | 9-6% |
| head pressure | 4-6 times | 120-160 times | ||
| Nozzle head diameter | 1.6 to 2 mm | 0.25 to 0.5 mm | ||
| hand distance | 30-50 cm | 40-60 cm |
Surface preparation
Painted surfaces – These surfaces must be completely clean and free of any grease and other contaminants. Before painting the surface must be perfect
Dry and if a long time has passed since the application of the undercoat, a suitable roughness should be created by soft sanding on the surface.
Steel surfaces – Wash the steel surface thoroughly to remove grease, salt and any other contaminants. De-ring and create
Profiles on surfaces by various methods such as ballast document up to 2.5 SA Swedish or by mechanical tools up to ST3-ISO
(SP10-SSPC).
In metal structures and welded points and corners should be smooth and polished and free of any appendages and sharpness.
After de-rusting and creating the profile of the particles obtained from the preparation and other contaminants, remove the surface with moisture and grease free from moisture and grease by vacuum method. Note that the application of the first layer (primer) should be done no later than two hours after preparation.
محصولات مشابه
عنوان
لورم ایپسوم متن ساختگی با تولید سادگی نامفهوم از صنعت چاپ و با استفاده از طراحان گرافیک است. چاپگرها و متون بلکه روزنامه و مجله در ستون و سطر آنچنان که لازم است.
عنوان
لورم ایپسوم متن ساختگی با تولید سادگی نامفهوم از صنعت چاپ و با استفاده از طراحان گرافیک است. چاپگرها و متون بلکه روزنامه و مجله در ستون و سطر آنچنان که لازم است.
عنوان
لورم ایپسوم متن ساختگی با تولید سادگی نامفهوم از صنعت چاپ و با استفاده از طراحان گرافیک است. چاپگرها و متون بلکه روزنامه و مجله در ستون و سطر آنچنان که لازم است.
عنوان
لورم ایپسوم متن ساختگی با تولید سادگی نامفهوم از صنعت چاپ و با استفاده از طراحان گرافیک است. چاپگرها و متون بلکه روزنامه و مجله در ستون و سطر آنچنان که لازم است.