Silicone acrylic paint 600 degrees Celsius
E-color silicone paint is a heat resistant paint with aluminum pigment. The color hardening mechanism is an intermolecular reaction that takes place due to heat, and if it is placed in ambient conditions, its hardening will be superficial. Including supplied properties
[print_button_en]
Description of nano traffic color
Its properties include:
- Very smooth, even and impermeable surface
- Very good brightness and effect
- Good abrasion resistance
- Water and moisture resistant
- Excellent resistance to ultraviolet radiation of the sun
- Oils resistant to fuels
- Very fast drying speed
- has very good self-cleaning capability
- Excellent adhesion to asphalt and concrete
- Excellent adhesion and durability
- Can be used and executed with marking machines
- Usability in different climatic zones
- Can be used with glass bits
Uses
This color is widely used for marking and marking roads and passages, including its uses are:
- Roads and highways
- Airport runway markings
- Urban thoroughfares
- Urban bookmarks
- Marking halls and parking lots
- Painting floors and walls of halls and parking lots
Technical specifications
| فام | Traffic white – Traffic yellow – Other shades |
| Volume solid percentage | 58 ± 2 |
| Storage time | one year |
| Recommended thickness | 100 to 400 microns |
| Density | 05, 0 ± 1.25 |
| 350 micron theory coverage | 1.2 square meters per kilogram |
Drying and coating conditions
| Drying time | Next layer application time | ||||||
| Temperature | surface | depth | Complete hardening | minimum | Maximum | Notes | |
| 25 ° C | 1 hour | 10 hours | 2 days | 6 hours | 7 days | Other factors such as the thickness of the color film and temperature changes, etc. affect the drying time. | |
Terms and equipment of application
| Thinner | Traffic thinner |
| Application temperature | 5 to 50 degrees Celsius |
| Maximum relative humidity | 80% |
| Surface temperature | 3 to 5 degrees above the dew point |
| Application method | Air spray. Airless spray, brush and roll |
| Application conditions | Ordinary spray | Airless spray | brush | Roll |
| Percent solvent | 5-10% | 3-5% | 3-7% | 4-8% |
| head pressure | 2 -5 times | 140 – 160 bar | ||
| Nozzle head diameter | 1.2 to 1.8 mm | 0.3 to 0.5 mm | ||
| hand distance | 30-50 cm | 40-60 cm |
Surface preparation
Painted surfaces – These surfaces must be completely clean and free of any grease and other contaminants. Before painting the surface must be perfect
Dry and if a long time has passed since the application of the undercoat, a suitable roughness should be created by soft sanding on the surface.
Steel surfaces – Wash the steel surface thoroughly to remove grease, salt and any other contaminants. De-ring and create
Profiles on surfaces by various methods such as ballast document up to 2.5 degrees Swedish SA or by mechanical tools up to ST3-ISO degree
(SP10-SSPC).
In metal structures and welded points and corners should be smooth and polished and free of any appendages and sharpness.
After de-rusting and creating the profile of the particles obtained from the preparation and other contaminants, remove the surface with moisture and grease free from moisture and grease by vacuum method. Note that the application of the first layer (primer) should be done no later than two hours after preparation.
Staining instructions
After preparing the surface and choosing the method of painting, first mix the fabric of the relevant solution with the recommended ratio and mix the mixture thoroughly to make it uniform.
Add a special amount of ethyl silicate thinner if needed (usually not needed) (add to the mixture and stir until a primer is applied, then apply the paint with a suitable tool.
Storage and transportation
The above color was flammable
Description of silicone acrylic paint 600 degrees Celsius
This cover includes:
- Good adhesion to the surface
- Good weather resistance
- Heat shock resistance
- Applicable to zinc ethyl silicate primer
- Excellent continuous heat resistance
- Excellent discontinuous heat resistance
Uses
This paint is used for decoration and protection on metals that are used in high temperature or heat. Its uses are:
- Tubes and tanks containing high temperature fluid
- Industrial furnaces and high temperature spaces
- Exposed surfaces in thermal power plants and refineries
Technical specifications
| فام | Silver Aluminum – Ral 9006 and Black Ral 9005 (limited shades) |
| Volume solid percentage | 40 ± 2 |
| Storage time | 12 months at 25 ° C |
| Recommended thickness | 20 microns |
| Density | 05, 0 ± 1.21 |
| Theoretical coverage of 30 microns per kilogram | 11.1 m2 |
| Theoretical coverage of 30 microns per liter | 13.5 square meters |
Drying and coating conditions
| Drying time | Next layer application time | ||||||
| Temperature | surface | depth | Complete hardening | minimum | Maximum | Notes | |
| 25 ° C | 50 minutes | After cooking at 250 ° C for 1 hour | 1 hour | – | Other factors such as the thickness of the color film and temperature changes, etc. affect the drying time. | ||
Terms and equipment of application
| Thinner | Silicone Thinner |
| Application temperature | 5 to 50 degrees Celsius |
| Maximum relative humidity | 80% |
| Surface temperature | 3 to 5 degrees above the dew point |
| Application method | Air spray. Airless spray, brush and roll |
| Application conditions | Ordinary spray | Airless spray | brush | Roll |
| Percent solvent | 7-9% | 3-5% | 4-6% | 4-6% |
| head pressure | 2-5 times | 120-150 times | ||
| Nozzle head diameter | 1.2 to 1.8 mm | 0.35 to 0.5 mm | ||
| Percent solvent | 30-50% | 40-60% |
Surface preparation
Painted surfaces – These surfaces must be completely clean and free of any grease and other contaminants. Before painting, the surface should be completely dry and if a long time has passed since the application of the undercoat, a suitable roughness should be created by soft sanding on the surface.
Steel surfaces – Wash the steel surface with a suitable solvent to remove grease, salt and any other contaminants. Decontaminate and create profiles on surfaces by various methods such as sand blasting up to 2.5 degrees SA Swedish or by mechanical tools up to ISO-ST3 (SSPC-SP10).
In metal structures and welded points and corners should be smooth and polished and free of any appendages and sharpness.
After de-rusting and creating a profile, remove the particles from the preparation and other contaminants from the surface with a pressure of air free of moisture and grease and with the method of vacuum and thoroughly clean.
Note that the application of the first layer (primer) should be done no later than two hours after preparation.
Staining instructions
After preparing the surface and choosing the method of application, first stir the paint to mix thoroughly, make sure that no sediment remains at the bottom of the container. Add a special amount of epoxy thinner (the amount depends on the method of application) to the mixture. Stir until the color is applicable. Then apply the paint with the appropriate tools.
Storage and transportation
The above paint is flammable, so it should be sealed in a sealed container and kept away from moisture, fire, and strong currents of electricity and incendiary materials.
It is recommended to consume the contents of the container as soon as possible after opening the lid.
proper temperature
محصولات مشابه
عنوان
لورم ایپسوم متن ساختگی با تولید سادگی نامفهوم از صنعت چاپ و با استفاده از طراحان گرافیک است. چاپگرها و متون بلکه روزنامه و مجله در ستون و سطر آنچنان که لازم است.
عنوان
لورم ایپسوم متن ساختگی با تولید سادگی نامفهوم از صنعت چاپ و با استفاده از طراحان گرافیک است. چاپگرها و متون بلکه روزنامه و مجله در ستون و سطر آنچنان که لازم است.
عنوان
لورم ایپسوم متن ساختگی با تولید سادگی نامفهوم از صنعت چاپ و با استفاده از طراحان گرافیک است. چاپگرها و متون بلکه روزنامه و مجله در ستون و سطر آنچنان که لازم است.
عنوان
لورم ایپسوم متن ساختگی با تولید سادگی نامفهوم از صنعت چاپ و با استفاده از طراحان گرافیک است. چاپگرها و متون بلکه روزنامه و مجله در ستون و سطر آنچنان که لازم است.