Description of solvent-free sanitary epoxy primer
Its properties include:
- Very good corrosion resistance
- High chemical resistance
- High abrasion resistance and hardness
- Excellent water and moisture resistance
- Good adhesion to steel surfaces
- Applicable with thicknesses over 200 microns
- Surface impermeability
- Designed for health systems
- Shine and excellent appearance
Uses
This coating is used alone as the final layer of sanitary epoxy systems and drinking water to protect the surfaces against corrosion and microbes. Due to the high solid percentage of paint with a spraying step, thicknesses up to 500 microns can be achieved. Its uses include:
- Drinking water tanks
- Water transfer pipes
- Sanitary equipment
- Industrial Drug Making Machines
- Food Equipment
- Food storage cells
- Sanitary ware containers
- Clean hall and operating room flooring
Technical specifications
| فام | White (other shades suggested subject to conditions) |
| Volume solid percentage | 100 |
| Storage time | one year |
| Recommended thickness | 500 to 200 microns |
| Density | 05, 0 ± 1.53 |
| 50 micron theory cover | 1.5 square meters per kilogram |
| Theoretical coverage of 100 microns per liter | 6 m2 / td> |
Drying and coating conditions
| Drying time | Next layer application time |
| Temperature | surface | practical | Complete hardening | minimum | Maximum | Notes | |
| 25 ° C | 4 hours | 24 hours | 7 days | 12 to 24 hours | 6 days | Other factors such as the thickness of the color film and temperature changes, etc. affect the drying time. |
Terms and equipment of application
| Thinner | TEP (Epoxy Thinner) |
| Application temperature | 5 to 50 degrees Celsius |
| Maximum relative humidity | 80% |
| Surface temperature | 3 to 5 degrees above the dew point |
| Application method | Air spray. Airless spray, brush and roll |
| useful life of paint and hardener mixture | 1 hour at 20 ° C |
| Application conditions | Ordinary spray | Airless spray | brush | Roll |
| Percent solvent | 15-10% | 8-5% | 9-6% | 9-6% |
| head pressure | 4-6 times | 120-160 times | | |
| Nozzle head diameter | 1.6 to 1.8 mm | 0.35 to 0.5 mm | | |
| hand distance | 30-50% | 40-60 cm | | |
Surface preparation
Painted surfaces – These surfaces must be completely clean and free of any grease and other contaminants. Before painting, the surface should be completely dry and if a long time has passed since the application of the undercoat, a suitable roughness should be created by soft sanding on the surface. Steel surfaces – Wash the steel surface with a suitable solvent to remove grease, salt and any other contaminants. De-rust and create profiles on surfaces by various methods such as sand blasting up to 2.5 degrees Swedish or by mechanical tools up to ISO-ST3 degree. In metal structures and welded points and corners should be smooth and polished and free of any appendages and sharpness. After de-rusting and creating a profile, remove the particles from the preparation and other contaminants from the surface with a pressure of air free of moisture and grease and with the method of vacuum and thoroughly clean. Note that the application of the first layer (primer) should be done no later than two hours after preparation. Concrete surfaces – If the concrete is fresh, it must be 28 days after the concrete has been applied (the concrete surface is completely dry). If the concrete is old, the surface must be washed with fresh water to remove contaminants such as salts, grease, dust and Dust, loose and unstable particles, etc. from its surface
Description of acrylic paint
Its properties include:
- Resistance to moss formation
- High chemical resistance
- Suitable resistance to water and moisture
- Simple and easy implementation
- smooth, one-handed surface
- Good resistance to salts and acids
Uses
This coating can be used as a final anti-moss layer in epoxy systems with vinyl. Its uses include:
- hulls of ships and vessels
- Drilling rigs and installations
- Facilities and equipment in contact with seawater
- Offshore Facilities
Technical specifications
| فام | red – ocher – brown |
| Volume solid percentage | 45 ± 2 |
| Storage time | one year |
| Recommended thickness | 70 microns |
| Density | 05, 0 ± 1.65 |
| Theoretical coverage of 170 microns | 1.6 square meters per kilogram |
| Theoretical coverage of 170 microns | 26 square meters per liter |
Drying and coating conditions
| Drying time | Next layer application time |
| Temperature | surface | depth | Complete hardening | minimum | Maximum | Notes | |
| 25 ° C | 0.5 h | 4 hours | 12 hours | 4 hours | Unlimited | Other factors such as the thickness of the color film and temperature changes, etc. affect the drying time. |
Terms and equipment of application
| Thinner | TVI |
| Application temperature | 5 to 40 degrees Celsius |
| Maximum relative humidity | 90% |
| Surface temperature | 3 to 5 degrees above the dew point |
| Application method | Air spray. Airless spray, brush and roll |
| Application conditions | Ordinary spray | Airless spray | brush | Roll |
| Percent solvent | 15-10% | 8-5% | 9-6% | 9-6% |
| head pressure | 4 -6 times | 120 – 160 bar | | |
| Nozzle head diameter | 1.6 to 1.8 mm | 0.35 to 0.5 mm | | |
| hand distance | 30-50 cm | 40-60 cm | | |
Surface preparation
Painted surfaces – These surfaces must be completely clean and free of any grease and other contaminants. Before painting, the surface should be completely dry and if a long time has passed since the application of the undercoat, a suitable roughness should be created by soft sanding on the surface.
Staining instructions
After preparing the surface and choosing how to paint, first stir the paint to mix thoroughly, making sure that no sediment remains at the bottom of the container. Add the appropriate amount of TVI thinner (the amount varies depending on the application method) to the mixture and stir until the color is applicable. Then apply the paint with the appropriate tools.
Storage and transportation
The above paint is flammable, so it should be sealed in a sealed container and kept away from moisture, fire, and strong currents of electricity and incendiary materials.
It is recommended to consume the contents of the container as soon as possible after opening the lid.
Suitable storage temperature is 20 degrees Celsius.
Safety
When applying paint, use safety equipment such as masks, goggles, cape and proper ventilation. In case of contact with skin, clean the area with a cloth soaked in a suitable solvent and wash with plenty of warm water and soap. Avoid breathing paint vapors, especially during application.
